(1). Restart the computer. Many software problems will correct themselves when you do.

(2). Check your cables. Keyboard not working? Make sure it’s plugged in. Mouse not responding? Make sure it’s plugged in.

(3). Check the electric power. Plug a lamp into the same power outlet that’s connected to your computer to make sure the outlet is working.

(4). Make sure the computer and monitor are plugged in.

(5). Disconnect peripheral devices (such as a printer or external Zip disk) and restart the computer.

(6). Listen for odd sounds. Is the cooling fanning running? Is the hard drive making noises?

(7). Look inside the computer for wires that aren’t plugged in all the way or other faulty connections.

(8). Start the computer from an outer start-up disk, such as the system software CD that came with your computer.

Instructions

(1). If you do decide to call technical support, write down the exact problem and what you were doing when it happens. Also note any error messages. Try to replicate the problem if you can.

(2). Be as precise as possible when talking to the support person. Example: “Whenever I try to start up my Mac, I see an icon with a little question mark. With my iMac CD, though, the computer boots in general.”

(3). Computers tend to collide or hang when their hard disks become too full. Free up space by deleting needless files and bare the Trash or Recycle Bin.

(4). don’t zap yourself or your RAM. When working inside the computer, turn the power off but leave the electrical cord plugged into the surge suppressor. Ground yourself by touching the casing of the power give before poignant any of the computer’s circuits.

Don’t take that computer monitor in for repair! Often, it is no longer cost-effective to do so. While you or your budget may or may not agree with these tips, it could give you more peace of mind. And help with deciding if and when that old CRT (tube) computer monitor should be retired. You may be surprised to know, a CRT type of computer screen is a more durable option if children or schools will be using it. They often have more life in them.

Necessary Things: CRT monitor, Scissors, Fountain pen, Cable

(1). Push the button on the front of the monitor to turn on the monitor if it is not powered on. You might hear a slight buzz sound and see the screen flicker. Wait for Microsoft Windows to load.

(2). In the case you do not see a picture, repeat the procedure. If it is flashing in any color other than green you may have a problem. Otherwise, give it time to warm up.

(3). Typical CRT monitor cable If you have another monitor available, unhook this one by detaching the broad cable with the blue end on it and reattaching the replacement monitor in the same slot.

(4). If the replacement monitor is powered on but slowly, then you be acquainted with the monitor is on its way out. If it does not work, it is possible there is a problem with the computer hardware, such as the video card. If this is the case, try to restart the computer. If it still fails, you may want to have it looked at by a computer business.

(5). You can safely and easily replace a CRT monitor with another CRT or a newer display. Be careful in some cases, older PC models cannot house LCD or a plasma screen, but this is rare. Keep your receiving until you verify that newly purchased monitor will work with your existing computer.

(6). Another sign a monitor is going is it will go dark without warning or even flicker. Sometimes there is a date by the model number, if this is an older model, consider replacing and/or an upgrade.

(7). If you would like a substitute CRT monitor, check the newspaper ads, thrift stores, Craigslist or eBay. They often have good deals.

(8). If all else fails, use your shears to cut out the ads in your local paper or a pen to write down good deals on monitors.

Instructions

(1). Use care and pull cord out slowly so you do not curve any pins, otherwise this will cause headaches when you go to reattach a monitor.

(2). Make sure the power cord to the monitor is plugged in on the monitor and on your power strip. This is often unnoticed.

(3). Check to see the cable is securely fastened into the plug and the pins are not bent. If not, you will get a lighter, vanishing screen. Twist the 2 pins in so they are firmly fixed firmly. Refasten the cable if it comes loose. You will not harm the computer by doing this.

(4). Transport a monitor by securing it tightly behind a car seat on the floor or firmly in a space in your trunk.

(1). You really need to update your internet browser. Some say mozilla firefox is more secured,if and only if, you install security plug-in. If you are a general internet user, I bet you are using internet explorer, then upgrade to its version 7,. It’s really fast(mostly on youtube) and nice look.

(2). Have antivirus software. There are many free wares there. Try using AVG or Avast. They are excellent shields for your everyday business.

(3). keep in mind not to visit unpopular websites. Those that have pornos on their pages are always sniffing your computer. So put advisory ads on your page. That’s all